RUBBER AIR SPRINGS (DLPM Series)
A complete Dynemech DLPM system consists of three master pneumatic isolators for 3-point precision leveling. Each pneumatic damping isolator consists of a leveling valve which is the load sensing and height controlling element. Systems are supplied with automatic height control valves, tubing and all other pneumatic accessories necessary for complete system installation.
Dynemech DLPM Mounts have minimal setting time. Long setting time using pneumatic isolators is not acceptable because precision measuring and positioning machines can suffer repeatability errors and through put losses. Isolation Characteristics.Natural Frequency for the Pneumatic Isolator Vertical - 2.5 - 2.7 Hz
Horizontal - 2.0 - 4.5 Hz
Damping: Vertical (Adj.) - 6% - 20%
Horizontal - 5% - 6%
Leveling Accuracy of +/- 0.15 mm
over 1 meter is available.
Applications of Pneumatic Dampers:
Active isolation of CMM Machines where auto-levelling of surface is required due to machine arm movement, vibration test rigs, engine test beds, Metrology instruments, Precision Manufacturing Equipment, Inspection Stations, Lab instruments - surface plates, spectrometers, roughness tester, hardness tester etc.
Note: As we are constantly upgrading our products, specifications are subject to change without notice.