Neotech

MICROFLAT CAST IRON STRAIGHT EDGES

Cast Iron Straight Edges are widely used for setting up and leveling machinery and for checking and spotting bearing surfaces during hand scrapping operations. properly supported, they may be used with various indicating devices to check surface flatness of large machined areas like Surface Tables, Machine Tables & Beds Machine guide ways, etc.

STANDARD SIZE FOR CAMEL BACK/BOW TYPE & TOLERANCE ON FLATNESS AND PARALLELISM

LENGTH OF ST. EDGE	MIN. WIDTH OF WORKING FACE	MIN. OVERALL DEPTH	MIN. FLANGE THICKNESS	TOLERANCE ON FLATNESS AND PARALLELISM
				GRADE-0	GRADE-1	GRADE-2
(MM)	(MM)	(MM)	(MM)	(μm)	(μm)	(μm)
300	30	80	10	2	3	6
500	35	130	12	3	5	10
800	40	175	14	3	6	10
1000	45	180	16	5	10	20
1600	55	275	20	6	12	20
2000	65	300	24	10	20	40
3000	90	400	32	15	30	60
4000	100	500	38	20	40	80
5000	100	550	46	25	50	100

*Other sizes on request.

Straight Edges are also available with following configuration:
Granite Straight Edge: Made from good quality Indian Black Granite
Aluminium Straight Edge: Hardened & Ground Knife Edge Straight Edge

STANDARD SIZE FOR CAMEL BACK/BOW TYPE & TOLERANCE ON FLATNESS AND PARALLELISM

LENGTH OF ST. EDGE	MIN. WIDTH OF WORKING FACE	MIN. OVERALL DEPTH	MIN. FLANGE THICKNESS	TOLERANCE ON FLATNESS AND PARALLELISM
				GRADE-0	GRADE-1	GRADE-2
(MM)	(MM)	(MM)	(MM)	(μm)	(μm)	(μm)
300	25	75	8	2	3	6
500	30	75	10	3	5	10
800	30	80	10	3	6	10
1000	35	100	12	5	10	20
1600	50	150	12	6	12	20
2000	50	150	14	10	20	40
3000	55	250	16	15	30	60
4000	60	300	18	20	40	80
5000	65	350	20	25	50	100

*Other sizes on request.

MICROFLAT CAST IRON STRAIGHT EDGES

Looking an Adequate Solution for your Company?

Solutions

Quick Links

Contact us