|
STORAGE
WATER TANK:
Corrosion proof Storage Tank made from mild steel, SS 304
or SS 316 Sheets.
COLLECTOR CASING: Aluminium extruded sections of 16
swg thickness, Weather tight construction, duly anodised
and corrosion resistant.
GLAZING: Single pan 4 mm. thick, low Iron toughened
glass, rupture resistant and over 85% transmittance and
low reflectance to eliminate glare.
ABSORBER PLATE: Made of grooved copper sheet' and
copper tube structure soldered to each other providing
maximum contact area for excellent heat transfer between
sheet and tubes. The absorber plate is coated with black
nickel chrome coating to produce a superior selective
surface having 95% absorption and very low emission of
20%. or black chrome painted.
ALUMINIUM FOIL: Attached to the insulation to
reflect the emitted heat radiation to the absorber plate,
thus minimising heat loss at the back.
|
INSULATION: High density rock wool slabs are used
at bottom and sides of the absorber plate to minimize heat
loss.
BACK PAN: Made of Aluminium Sheet 20 swg thick duly
anodised.
TUBING GRID: 12 mm. Copper water way silver-brazed to
25 mm. copper manifold with an optimal ratio between
diameters.
PIPING CONNECTION: Can be made at four locations
with the help of bolts and nuts with rubber seals between
the joints.
 |
