|
|
 |
|
|
| Type of Hydropack's Hydraulic Presses Available With Neotech
|
'C'
Type Presses
Benefits/ Features:
These are multipurpose presses used in general workshops and automobile
workshops for Straightening, Pressfitting, bending, Forming, Punching,
Assembling, Dismantling etc. Presses can be operated either with
manual hand pump or with power pack. These presses are with adjustable
daylights.
- Heavy Duty construction.
- Moveable work table
- Large daylight.
- Hydraulic return concept
- Rigid Frame under full load
- Operated manually or with separate Power Pack.
|
Capacity
|
6.3 to 100 Tonnes |
Stroke
|
50 to 500 mm |
| Daylight |
From 150 - 800 mm |
| Table Size |
From 300x300 to 800x1000 mm |
|
| |
 |
|
 |
Capacity
|
25 to 500 Tonnes |
Stroke
|
From 200 to 650 mm |
| Daylight |
From 300 to 1200 mm |
| Table Size |
From 300 x 300 to 1200 x 1200 mm |
|
Closed
Frame Type Press: HCF
Benefits/ Features:
Closed Frame Presses are generally used for Blanking, Compacting,
Moulding, Embossing, Punching, Deep Drawing, Coining, Forming
and General other applications. These can be operated either
manually or with push buttons. The specifications may be altered
as per individual needs.
- Heavy Duty construction.
- Rigid Frame under full load.
- Operated with built in or separate Power Pack through
Push button or Foot switch.
|
|
Four
Pillar
Presses: HFP
Benefits/ Features:
Four Pillar type Presses are generally used for Blanking,
Embossing, Moulding, Punching, Deep Drawing, Coining, Forming
and General other applications. These can be operated either
manually or with push buttons.
- Heavy Duty construction.
- Large Daylight.
- Rigid Frame under full load.
- Operated with separate Power Pack through Push button
or manually.
|
Capacity
|
25 to 500 Tonnes |
Stroke
|
From 200 to 650 mm |
| Daylight |
From 300 to 1200 mm |
| Table Size |
From 300 x 300 to 1200 x 1200 mm |
|
|
|
Capacity
|
10-500 Tonnes |
Stroke
|
From 150 to 600 mm |
| Daylight |
From 300 to 1200 mm |
| Platen Size |
From 300x300 to 1200x1200 mm |
|
Rubber
Moulding Presses: HMP
Benefits/ Features:
These presses are generally used for moulding automobile
rubber components, Rubber Seals V belts, conveyor belt making,
flap moulding plastic, Bakelite panels for wood, plywood
& Board finishing etc.These moulding presses include
compression / transfer moulding & automatic 4 plate
mould opening with sledding table. It has a range up to
1500 tones
- Heavy Duty construction.
- Single or multiple daylights.
- Platen Heating can be electrically, steam, or by
thermic oil.
- Single or Double acting.
- Rigid Frame under full load.
- Operated manually with D.C valve or push button.
|
|
|
|
