|
General
Specifications
|
| Capacities |
Pressure |
FCH
Piston Accumulators are available in any capacity between
0.5 litres & 1350 litres.
Capacity is only limited by pressure and available material.
FCH Standard range is 1 litre up-to and including 150
litre.
All units are made to order, and can be custom made to
suit specific space envelopes. |
Piston
accumulators are available in any pressure between 5 bars
& 2500 bars.
Pressure rating is dependent on capacity and / or available
materials. |
| Materials |
Design |
| Available
in a variety of materials such as carbon steel, stainless
steel, duplex and super duplex stainless steel & aluminium. |
Standard
units are designed to BS5500 and can be supplied with
Lloyds release. Other Lloyds Register design codes
and approvals can be supplied such as ASME VIII Div1 (not
'U' stamped), DNV & Stoomwezen. |
| Fluid
End Connections |
Gas
End Connections / Fittings |
To
suit customer requirements :
NPT, BSP, Autoclave, SAE Flange Face. |
To
suit customer requirements - NPT, BSP, Autoclave Type,
Transfer Barrier Ports, Gas Charging Valves (Brass and
Stainless), Burst Disc and Fuse Plug Assemblies. |
| Seals |
Piston
Position Indicator Devices |
For
low or high temperature applications.
Materials typically - Nitrile, PTFE, Viton, E.P., H-ecopur,
Ecotal. |
Carbon
Steel Options:
1. Tailrod - Magnetic operation with visual flapper
or magnetic indicator switch.
2. Tube Indicator - Magnetic operation with visual
flapper or magnetic indicator switch.
3. Tailrod - Operating a cam / switch.
4. Proximity switches.
Stainless Steels Options.
1. Piston Magnet - Magnetic operation with
visual flapper or magnetic indicator switch.
2. Proximity Switches. |
