|
|
Lubomatic
Pneumatic Grease/ Oil Pump
These are pneumatically operated pumps. During
reverse stoke grease/ oil is sucked and during forward stroke
grease is discharged. The operation can be controlled electronically
or manually.
|
MODEL
|
RESERVOIR
|
DISCHARGE |
PRESSURE |
|
LPnGOP
1.5-6
|
1.5
litre
|
06
cc/stroke
|
100
kg/cm
|
| LPnGOP
5-30 |
5.0
litre
|
30
cc/stroke
|
180
kg/cm
|
| LPnGOP
5-60 |
5.0
litre
|
60
cc/stroke
|
180
kg/cm
|
| LPnGOP
15-60 |
15.0
litre
|
60
cc/stroke
|
180
kg/cm
|
|
 |
|
Lubomatic
Pneumatic/ Hydraulic Oil Pump
These are pneumatically operated piston type
pumps. These pumps are operated intermittently for automatic
lubrication of machines. The operation can be controlled by
an electronic timer and solenoid valve or manually. These
pumps are supplied in reservoir capacity ranging from 1 litre
to 5 litres with pump discharge of 6 cc to 10 cc.
|
|
|
|
| Model |
: |
Standard 6, 8, 12 outlet
type. |
| Special 14, 16,
18, 22 outlet type |
| Lubricant output |
: |
0.20 cc/outlet/cycle. |
| Flow Rate/min |
: |
125 cc/outlet |
| Operating Pressure
|
: |
15-bar min. and
300-bar max |
|
Progressive
Distributor Blocks
Centralised lubrication system by using
progressive distributor block is a self monitoring and reliable
method against severe operating conditions. The oil/ grease
discharge is metered and uniform irrespective of piping
lengths. The lubrication point gets dosages of oil/ grease
in progressive manner
|
|
|
Manifolds
& Fittings
Manifold are used for mounting metering cartridges.
These are zinc plated steel blocks. Avaliable models are LMF-
1 to LMF- 9
All fittings for centralised lubrication system are avaliable
|
|
|
